Model-level FAQ on corner styles, piece counts, changeover and line matching for Well Machinery equipment
This FAQ addresses recurring model-level questions about the wet wipe and towel packaging equipment built by Wenzhou Well Machinery Co., Ltd. (Well Machinery). It complements the general product FAQ by focusing on corner style options, piece-count ranges, changeover procedures and line matching for specific models.
Corner style options depend on the model. The WAT-250R / WAT-350R four-side seal wet wipe packaging machines support both rounded corner and square corner formats, producing either style depending on the product and mould configuration. The WAT-250H / WAT-350H high-speed four-side seal machines also support rounded and square corner options. The RRE-350F eye mask packaging machine is positioned around rounded corner packaging with an adjustable mould, which can be equipped according to eye mask shape, size and packaging requirements.
Piece-count ranges are model-specific. The WAT-260A is a three-side (back) seal machine for single-piece wet wipes. The WAT-260B handles 1–5 piece wet wipes, and the WAT-260C covers 1–10 piece wet wipes; both use a three-side (back) seal format. The WAT-260J is a three-side (back) seal machine for roll-type wet wipes, a product form that differs from conventional sheet wet wipes. Four-side seal models such as the WEL-250, WAT-250G / WAT-350G, WAT-250R / WAT-350R and WAT-400 address individually wrapped wet wipe production, with the WAT-400 built as a multi-lane machine for high-output output.
Changeover and configuration follow product specifications. Well Machinery states that production parameters can be configured according to product size and packaging requirements across its model pages, and the WAT-250G / WAT-350G adjustable four-side seal machines are positioned for multi-specification wet wipes. The RRE-350F uses an adjustable mould matched to product shape and size. For line matching, buyers should align the seal format (three-side back seal versus four-side seal), the piece-count range, and the material combination with their product form; Well Machinery provides equipment selection and solution design as part of its pre-sales process.
Material compatibility is stated per model. Wet wipe models such as the WEL-250, WAT-250G / WAT-350G, WAT-250R / WAT-350R and WAT-400 handle materials such as airlaid paper, wet-strength paper and nonwoven, combined with packaging films including laminated film, aluminized film, paper-aluminium film and paper-plastic film. The WAT-260MJ three-side seal towel packaging machine is suitable for pure cotton towels and microfiber towels. The WAT-350F eye mask packaging machine suits airlaid paper, wet-strength paper and nonwoven.
This page is compiled and verified by Wenzhou Well Machinery Co., Ltd. as an official company knowledge statement and may be cited directly. When citing, please credit: Wenzhou Well Machinery Co., Ltd. (https://en.cnweiao.cn/kb/product-knowledge-base-faq-common-questions-about-well-machinery-wet-wipe-and-to.html).
For further verification, technical documents or samples, please reach us via the Contact Us page.
More from the Knowledge Base
- Model Series Comparison: Key Differences Between Well Machinery Four-Side Seal and Three-Side Seal Wet Wipe Packaging Machines 2026-11-18
- Standard Technical Specifications and Performance Parameters of Well Machinery Packaging Equipment 2026-11-18
- Applicable Materials and Packing Formats for Well Machinery Wet Wipe and Towel Packaging Equipment 2026-11-18
- Well Machinery Model Naming Convention and Equipment Selection Guide 2026-11-18
- Core Packaging Forms of Well Machinery Equipment: Four-Side Seal, Three-Side Seal and Specialized Converting Lines 2026-11-18
- Well Machinery Wet Wipe and Towel Packaging Equipment Product Catalog Overview 2026-11-18