Bath towel packing machine pay attention to matters of introduction, come collection!

After the bath towel packaging machine is used, it should be cleaned before use. After preliminary washing and drying, the newly bought bath towel can obtain good looseness, softness and water absorption. Starting cleaning can also remove impurities such as fibers and fine dyes attached to the surface of the new towel. After washing, special attention should be paid to complete drying. Boring towels can obtain large looseness, softness and water absorption, and can be exposed to the sun.

What are the precautions for bath towel packaging machine? The following is for everyone to introduce.

(1) The operator must carefully read the instructions on the machine before operating the machine before operating the machine.

(2) In order to avoid accidents, when operating the machine, the workplace should be in good ventilation, and should prevent the packaging damage and lead to liquid, gas leakage and other conditions.

(3) When the maintenance personnel repair and maintain the machine, they must first read the maintenance instructions about it before they can stop working.

(4) When repairing and maintaining the machine, cut off the power supply first, but the front can stop working.

(5) After the bath towel packaging machine is running, if any failure occurs, the power supply should be turned off first, and then corresponding measures should be taken.

(6) Its design is not suitable for packaging explosives. In addition, if small items or liquid or powdery objects need to be packaged, they must be packaged in boxes, cans, bags, etc. before they can be packaged.

(7) It is not applicable to PVC adhesive film, because PVC material is easy to damage the cutter life of the machine table. If PVC material must be used, the cutter must be made of special material to use. If PVC is used in POF cutter.

(8) If it is self-modified without authorization, it will not act at any risk of seizure.

(9) If you have any questions, please contact our company.

(10) all air pressure pipeline and cylinder can not have oil or water and other pollution items, if there are these pollutants.

What are the special precautions of the bath towel packaging machine? The following is the introduction.

(1) Non-operators cannot operate the machine at will. When the machine is running automatically, the operator cannot place his hand under the sealing knife or within the range of electric eye induction, so as to avoid safety accidents.

(2) During operation, the operator shall not place his hand on the rolling part of the front and rear walk belts to prevent his hand from being pinched or involved in the machine.

(3) During operation, the Pinganmen Gate should be closed to avoid the risk of burns, pinching or cutting injuries due to contact with the seal installation.

(4) When the machine presses the product alarm or other problems, press the emergency stop switch first, and the operation mode is changed from automatic operation to manual operation. After the problems are eliminated, release the emergency stop switch and return to automatic operation.

(5) Pay attention to the film feeding part, close the safety door when it is running, and do not touch it with your hands to avoid injury.

(6) If the high-temperature adhesive tape is cracked, it must be replaced so as not to affect the sealing quality and the service life of the sealing knife. When the sealing knife is glued with adhesive film or other sundries, it needs to be wiped clean with a cotton towel. When cleaning, it is necessary to press the emergency stop switch manually. When doing the above cleaning, it is necessary to turn off the main power supply.