What are the advantages of high-speed wet towel machine? What are the common faults?

High speed wet towel machineWhat are the advantages? What are the common faults?

　High speed wet towel machineIs a small smart appliances, designed to adapt to modern life, change the traditional towel habits. Can produce fresh, health, hot and cold wipes. The processed high-grade spunlace non-woven fabric can be processed into wet wipes, which can be used once, avoiding the cross-infection caused by the repeated use of traditional towels. Compared with other products, the high-speed wet towel machine has the following advantages:

1. Easy to use, convenient and hygienic. The wet tissue machine adopts a unique reel structure and cutter to automatically make wet tissue. The wet tissues and paper rolls in the machine will be separated immediately and will not cause contamination of the paper towels. Using electronic automatic sterilization, fresh health.

2. Low cost. Each roll of wet paper towels as long as a dime, than other bags of wet paper towels save a lot of money.

　　3.High speed wet towel machineUsing pure plant fiber spunlace non-woven soft towel roll and water as raw materials made of wet wipes, no stimulation, no addition, gentle skin care. If necessary, you can also add disinfectant or plant essential oils to the water tank to make a disinfectant towel or aromatic towel.

4. Use anytime, anywhere, open anytime. At present, the bagged wet wipes used in general hotels have the risk of secondary pollution, and storage also takes up space. Wet wipes if accidentally wet, will become dry wipes. In addition, the wet wipes bagged for guests are much more cordial than the wet wipes on the wet wipes tray, making guests feel at home.

　　5.High speed wet towel machineYou can adjust the heat and cold by yourself.High speed wet towel machineEquipped with a hot button and a cold button, the temperature is between 10 and 80. In the cold winter, wipe the guest's hands with warm wet paper towels to show the host's meticulous service. If your hotel is still using traditional napkins for guests, consider the benefits of using disinfectant wipes.

According to statistics, traditional napkins are made of recycled waste paper, and bacteria seriously exceed the standard, so if you use a towel machine, these are not problems.High speed wet towel machineSuitable for hotels, hotels, hospitals, kindergartens, public places, etc.

5. The sealing machine of the wet wipe packaging machine stops and starts.

In production, we have encountered the problem that the sealing machine stops and stops and the speed is inconsistent. Unpack the panel on the back of the sealing machine and find that the connection between the shaft of the motor and the gearbox is loose. Tighten the screws again and all the alignment also solves the problem.

In addition,High speed wet towel machineThe main motor is operated with carbon brush contact. If the carbon brush is severely worn, the contact with the slip ring is not complete, or the friction is poor, it will also cause the sealing machine to stop and go. A new carbon brush of the same model can solve the problem.

This kindHigh speed wet towel machineFaults are also common, although they do not cause packaging leakage. But it affects the beauty of the packaging and destroys the image of the product.

(1) The wet wipe packaging machine equipment has been used for a long time, and dirt such as dust and plastic chips are attached to the high-temperature belt, causing the high-temperature belt to be unsmooth and uneven, resulting in uneven heating of the seal. Air bubbles appear after the cold roller is pressed, and the fault can be eliminated by cleaning or replacing the high temperature belt again. The high-temperature belt is generally 1.5cm wide and 22m thick. If it cannot be washed off after being dirty, it will have to be scrapped.

(2) There are irregular concave and convex marks on the cold-pressed rubber wheel, which are directly reflected on the packaging, so that there are more obvious marks on the sealing. In order to ensure the beautiful appearance of the packaging bag, it is recommended to replace the cold pressing rubber wheel.

6. Wet wipes packaging machine maintenance should pay attention to the problem

(1) The sealing machine should be placed in a ventilated and dry place. Generally, the room temperature should be kept at about 25.

(2) Every 48 hours of operation, add No. 6 engine oil to all moving parts. At the main gear, bearings and gearbox, etc.

　　(3)High speed wet towel machineRegular dust removal is required to keep the whole machine clean. When not in use, unplug the plug and cover it with a cloth.

(4) If the working time is too long, please turn on the cooling fan before shutting down. Shut down after the temperature drops, because it will shut down without cooling, and the high temperature zone is easily damaged.

(5) the high temperature zone regularly remove dirt. Ensure sealing quality.

(6) The severely worn parts must be replaced immediately to extend the life of the whole machine.